PRE INSPECTION USE (DONE BEFORE EVERY USE):

• Damaged or cracked housing, power source, or bits/accessories
• Dull blades are often more dangerous than sharp blades
• Missing guards or protective devices
• Leaking gasoline, oil or other fluids
• Tool appears to be in poor condition
• Does the tool have a 3 wire cord, if not is it double insulated?
• Ensure area is free of any potential trip hazards
• Do not underestimate the importance of a clean work area

Plug Not Rated For Outdoor Use.
Not Water Tight.

PROPER USE:
In construction portable power tools with defective wiring cause many injuries.
The following safe practices will help to make sure you stay safe:

• Ensure you are wearing the correct PPE
• You should always wear eye protection
• Use the proper tool for the job
• Use tools with three wire plug and make sure connections are tight.
• Disconnect tool before making adjustments or repairs.
• Follow the manufacturer’s instructions
• If unsure about use, ask a supervisor or coworker
• Insure tools are not pointed at or operated in close proximity to other individuals
• Use spark resistant tools when working near a fuel source
• Do not use excessive force to cut/drill through hard materials
• Never place your hand behind the material you are working on when the tool could push through.
• Gasoline/Mixed Fuel Powered Tools must be off and cool when re-fueled, use only in well ventilated areas.

REMINDER – INSPECT YOUR TOOLS BEFORE USING THEM!